Glen-L.com

No, ... I still have it under tarps in the driveway. The city stopped giving me crap about it since I have no backyard. I still want to get rid of it since i am unable to ride in them due to medical issues, ... took a bad fall at work, broken hip, 4 hernias and a few front teeth are now missing. Reg...

I think these where tweakers or similar. The Tiny Tack only has a life span of 5 years, it had one left and they cut the wires a foot or so from the unit and requires the same type of wire to replace it. The tank in the white boat was old and about to split and the kill switches can be bought for $1...

Hey All, *** RECOVERED *** The boats and trailer have been recovered. only the kill switches, 1 fuel tank and a Tiny Tack where missing. I was called by the local PD at 12:30 am last night and was asked If I wanted to come get them, ... sure enough abandoned on the side of the road in the middle of ...

Hey All, ...

Someone stole 2 hydros and a trailer on 2-7-15 in the middle3 of the night. They Are/Where in SoCal area.

Pics are in this thread
viewtopic.php?f=11&t=26828

Any info would be appreciated, ...


Regards
Bill

Hello Everyone, *** RECOVERED *** Just making an announcement to watch out for some stolen boats and a trailer in the SoCal (probably still) area. It happened on 2-7-15 in the middle of the night. Any info would be appreciated, ... Glen-L Super Spartan Hal Kelly Wetback Modified Galvanized Trailer b...

You also get more money separating the motor from the boat. Selling them together, your just tossing the boat in for free. Separately allows you to get a little something for the boat. If you have not completed the boat, ... STOP!!!, sell the lumber not yet used separate from the boat. Raw lumber, y...

Realistically, ... (hang on to your seat) ... Probably 1/3-1/2 of what you have in it.

Possibly frame (2) was put on the wrong side of the line considering your error and the frame are both 1/2". I agree with slug, ... lengthen the bow pieces. Did any of your measurements change between frame (2) and the transom that you'd be willing to admit to, ... ?

Bill

Well, it's to hard to gather friends and family to hit the water. I was only able to take the Sartan out once last year and MAYBE once this year. It just seems silly to keep 2 built boats and 2 uncompleted boats around for just one outing a year. Simply, it's just to much money just sitting around d...

Andy Garrett wrote:Since it's been about a year, I was wondering how this project is progressing.

Nope, ... Not lately.

I'll bet getting rid of it shortly as I just have way to much on my plate to deal with it.

Bill

We're looking at this the same, but from different ends. I avoid water until the 3rd coat. I dont want to chance moisture getting into small pin holes. If that happens, I have to wait a few days for it to dry out otherwise you risk blisters and fogging. Acetone or Alcohol will evaporate within minut...

Hi Billy, Ok, that is with Systems 3 which I don't think I have used that brand. The scary thing is it says to use compressed air and not to use acetone. I would be more concerned with the compressed air shooting oil particles at the surface, and I certainly would not use an air hose if I could not ...

To lift the dust, ... um I do, I just lightly dust with it with no hand pressure. It picks up the fine dust before I coat it. I make sure I don't use a fresh rag but one that has been used to remove primer dust so I dont contaminate the the surface with a soggy tac rag. I haven't had any issues doin...

bob smith wrote:What do you use as a tack rag between epoxy coats?
Bob Smith
Chester, SC

Bob,

If you sanded it, ... then use a "Tack Rag". They can be purchased anywhere you buy paint and they cost about a buck. If it's still green, your good to go as previously stated.

Bill

When using liquid epoxy after only a few minutes I break into a profuse sweat. Just pouring off me, yet when I use gel epoxy I don't have a problem. Is it just me or do others find this too. Curious? Tony from Tiaro Tony, I'm like you, the water works turn on. I just try to limit the drips in the e...