What kind, options, etc.

Moderators: ttownshaw, billy c

Post Reply
Posts: 47
Joined: Tue Jun 12, 2012 10:27 am
Location: Barrie Ontario Canada


Post by mlavimodiere »

As I'm sure the world knows by now I'm about to start my first boat :shock: And it's Torpedo.
What fastening technique should I use ? :shock: is it the raptor Sytem or the vaccum bag method? I want her to look perfect and have no idea what the end product will look like if I use the raptor system.... So if someone has some close up pistures it would be greatly appreciated.. :D And secondly what is the easier way of doing it?

User avatar
Posts: 1544
Joined: Tue May 26, 2009 12:47 pm
Location: Lakeland, Fl

Re: Fastening

Post by jamundsen »

I used the raptor staples and was very pleased with them. I used steel staples for the mahogany layer and pulled them. Pulling them was not as bad as I'd thought. The holes left are negligible. Dave Lott used the Raptor brads for all the laminations and just stained them.
John Amundsen
Monte Carlo

Work tends to get in the way of boat building

Post Reply

Return to “Fasteners”