Chinook/Mackinaw breasthook shear connection question

A forum for contacting other builders of Ken Hankinson designs. These designs are now a part of the Glen-L family.

Moderators: Bill Edmundson, billy c

Post Reply
NZScott
Posts: 7
Joined: Fri Sep 21, 2018 1:24 am

Chinook/Mackinaw breasthook shear connection question

Post by NZScott » Fri Jul 26, 2019 4:30 pm

Hi all,
Anyone have some pics of the breasthook shear connection on this design? I presumed that the breasthook needed to be beveled along the bottom edge (Top with the boat upside down) as the shear has quite a decent twist in it forward. but if that was the case it seems like the breasthook should be about 30mm further forward on the stem.

Anyone have any insight here?

P.S. I have followed the plans in all aspects.

Cheers

Scott

NZScott
Posts: 7
Joined: Fri Sep 21, 2018 1:24 am

Re: Chinook/Mackinaw breasthook shear connection question

Post by NZScott » Sat Jul 27, 2019 7:28 pm

Don't worry I have sussed it out now.

Post Reply

Return to “Hankinson designs”