1/2 ton pu with 6 1/2 ft. Bed.

To allow builders of Glen-L RV's to communicate and discuss their projects

Moderator: Bill Edmundson

Post Reply
Posts: 1
Joined: Sat Aug 19, 2017 2:37 pm

1/2 ton pu with 6 1/2 ft. Bed.

Post by Hoss »

I want to build a 8 foot slide in camper and put it in a pu with a 6 1/2 ft. Bed with the tailgate down. Is there a problem with this?

User avatar
Mr Hot Rod
Posts: 982
Joined: Thu Mar 03, 2005 2:40 pm
Location: Chelsea, Quebec, Canada

Re: 1/2 ton pu with 6 1/2 ft. Bed.

Post by Mr Hot Rod »

Welcome to the Forum, Hoss !
Tell us a bit about your truck's engine, transmission, gearing and payload capacity. As a general rule, the camper's CG (Center of Gravity) must fall within the rear wheel's leading and trailing edge.

More info below. Scroll down to item # 6, COG (Center of Gravity) :
The link below is a list of dimensions which can be used to determine if the camper you are interested in will fit you truck without modification to the plans and patterns :
See our website's Video Directory for links to RV Build Websites and Photo Albums.

Paul Kane
Kane Custom Boats Ltd.
Chelsea, Quebec

Building the Glen-L Hot Rod : http://www.kanecustomboats.com
Glen-L Hot Rod build thread
Kane Custom Boats YouTube channel
Glen-L Boat Video Directory

Post Reply

Return to “Glen-L RV's”