Flip after bottom, prior to glassing

Outboard designs up to 14'

Moderator: ttownshaw

Post Reply
Jim Anderson
Posts: 32
Joined: Mon Dec 07, 2020 5:07 pm
Location: American Samoa

Flip after bottom, prior to glassing

Post by Jim Anderson »

Power-Row Skiff 15.5WB>Sides on and trimmed along transom, chines, stem. Putting on the bottom in a couple days. Any problem flipping the boat after that to trim the PW along the sheer? Can't see-reach well enough inverted. I also want to plan some interior work that may involve fastenings through the sides or bottom prior to glassing. Fasten + glue knees for thwarts, flotation boxes, battery box, wiring, and a bow post fastened to stem-breasthook-keel area. Flip again for glass and paint. Anything I should consider first? Thanks.

Post Reply

Return to “Small outboards”