Chugalug's BoJest

Designs for inboard or outboard power

Moderator: BruceDow

User avatar
chugalug
Posts: 1537
Joined: Sat Nov 29, 2014 5:01 pm
Location: top of mn.

Re: Chugalug's BoJest

Post by chugalug »

I pulled it once and found little crack.When I ground that out,wood was dry so filled and sanded with epoxy total fair.I thought when I filled all the tanks(fuel & water) it would leak faster.Nope! I can live with that I guess-got auto bilge pump in case but water hasn't even touched that yet.
Working on regular-sized Bo-Jest


"If it's not crooked,It's not mine

User avatar
chugalug
Posts: 1537
Joined: Sat Nov 29, 2014 5:01 pm
Location: top of mn.

Re: Chugalug's BoJest

Post by chugalug »

:D Checked bilge today.No water.Hmmmmm.Then thought about what happened on first launch.The water was just above freezing so had condensation problem.Maybe.A day after first launch and take out,the channel froze over.Ice went out early this year and air temps have been cold.Today its finally warmer. :D
Working on regular-sized Bo-Jest


"If it's not crooked,It's not mine

User avatar
chugalug
Posts: 1537
Joined: Sat Nov 29, 2014 5:01 pm
Location: top of mn.

Re: Chugalug's BoJest

Post by chugalug »

:D Went out again tonight.Sunset wasn't too spectacular.But got to go up Bear river.Waters up a little so made it over mud bar at the mouth.
IMG_1736.JPG
The place I've been building diamond willow stair railing.
IMG_1739.JPG
Coming back out of the creek.Weeds aren't up yet so gotta go by memory and some markers.
IMG_1746.JPG
Working on regular-sized Bo-Jest


"If it's not crooked,It's not mine

Post Reply

Return to “Power Boats”