Super Spartan

Designs for inboard or outboard power

Moderator: BruceDow

Post Reply
Jetsrev
Posts: 3
Joined: Sat May 01, 2021 8:01 am

Super Spartan

Post by Jetsrev »

Thanks for welcoming me, I am new to building a super Spartan, my first question is the full bottom sheet is there a relief cut making it a bit narrower than towards the front , I can't seem to locate this in the directions. Thanks

User avatar
Roberta
Posts: 7192
Joined: Tue Jul 31, 2007 5:23 pm
Location: East Troy, Wisconsin

Re: Super Spartan

Post by Roberta »

Not sure I understand your question. I built the Super Spartan and don't recall a relief cut in the bottom. Gayle posted my build in some notes. Do a search on "Roberta's Super Spartan" and a note directing you to the build pictures can be found.

Here is a link to the build. It jumps around to numerous parts.

https://boatbuilders.glen-l.com/3263/su ... -on-forum/

Roberta
Roberta "Queen of the Boat Builders"
Built Zip "Oliver IV", Super Spartan "Jimmy 70", and Torpedo "The Glen L".

Jetsrev
Posts: 3
Joined: Sat May 01, 2021 8:01 am

Re: Super Spartan

Post by Jetsrev »

Thanks I am still reviewing the directions I am picking up the wood on Monday, I will try and post a picture of what I am referring to .

Jetsrev
Posts: 3
Joined: Sat May 01, 2021 8:01 am

Re: Super Spartan

Post by Jetsrev »

After looking closely at the plans it looks like 34" wide from the transom to 50" long then the width is is 35 1/2 wide from that point forward. Referring to the bottom panel

User avatar
Roberta
Posts: 7192
Joined: Tue Jul 31, 2007 5:23 pm
Location: East Troy, Wisconsin

Re: Super Spartan

Post by Roberta »

Sounds right. It jogs in for the sponsons.

Roberta
Roberta "Queen of the Boat Builders"
Built Zip "Oliver IV", Super Spartan "Jimmy 70", and Torpedo "The Glen L".

Post Reply

Return to “Power Boats”