Page 1 of 1

Dynojet?

Posted: Tue Nov 20, 2018 2:28 pm
by cepjr
Is anyone here building a dyno jet?

Re: Dynojet?

Posted: Tue Nov 20, 2018 4:04 pm
by Bill Edmundson
Looks like a good build to me. I don't know of another DynoJet build right now. There are several people with stitch and glue experience here and with jet experience.

Bill

Re: Dynojet?

Posted: Tue Nov 20, 2018 4:09 pm
by cepjr
Thanks bill ! I'm about 8 months into it its been a lot of fun! And work!

Re: Dynojet?

Posted: Tue Nov 20, 2018 5:28 pm
by DSR
Hi cepjr, welcome!!

Have you picked anything out to power your Dynojet yet? And any pics?........we like pics........ :D

Thanks,
Dave

Re: Dynojet?

Posted: Tue Nov 20, 2018 6:09 pm
by cepjr
Thank you for the welcome! I chose to use a 750cc 2 stoke polaris triple (hope it floats)!!! I'll try to art. Some pics I hope my building skills are better than my computer skills!
IMG_20180625_204531.jpg
IMG_20181016_194742.jpg
IMG_20180625_204531.jpg

Re: Dynojet?

Posted: Wed Nov 21, 2018 9:39 pm
by cepjr
cepjr wrote:
Tue Nov 20, 2018 6:09 pm
Thank you for the welcome! I chose to use a 750cc 2 stoke polaris triple (hope it floats)!!! I'll try to art. Some pics I hope my building skills are better than my computer skills!IMG_20180625_204531.jpgIMG_20181016_194742.jpgIMG_20180625_204531.jpg
. How's your build going!

Re: Dynojet?

Posted: Thu Nov 22, 2018 8:02 am
by DSR
Man, your Dynojet should run really good with that triple in it, and the boat looks great!! Thanks for the pics.

My TNT was kinda back on the back burner until very recently unfortunately. I was planning on getting a lot done on it this summer, but the job I took this last March ended up with me working 60-70 hrs a week managing the shop and putting other peoples toys together, along with doing my own V8 S10 build (my tow vehicle for the TNT.... :D ), things have been a little crazy.
I've started getting back into the TNT build in the last week or so working on more CAD-design stuff for fitting the boat out and getting a tiny start on the CNC mill, and I did finally find a company to make the pump driveshaft I need for it, so making a little progress....

Thanks! :D
Dave