Regulations

Designs for inboard or outboard power

Moderator: BruceDow

Post Reply
donray0
Posts: 2
Joined: Tue May 19, 2015 9:56 am
Location: Mississippi
Contact:

Regulations

Post by donray0 »

Hi everyone. I just received my set of plans for the Bass Boat and hoping to get started soon. While looking on the net I saw there is a huge amount of government (coast guard) regs that a builder has to comply with( labels, hp, max people, floatation and others) that has to be displayed in order to register your finished boat. Very discouraging to someone just about to start out. Anyone know how to compute all this?
Donald P

User avatar
Bill Edmundson
Posts: 12054
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:

Re: Regulations

Post by Bill Edmundson »

Donald

It's not as bad is it looks. Most of these are for commercial builders. I'm not saying they aren't good to have in mind. But, some of them, I think they've decided home builders can die.

http://files.dnr.state.mn.us/education_ ... ilders.pdf

This is the whole thing.
http://www.uscgboating.org/regulations/ ... loads.aspx

Bill
Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build

User avatar
chugalug
Posts: 1513
Joined: Sat Nov 29, 2014 5:01 pm
Location: top of mn.

Re: Regulations

Post by chugalug »

:roll: Good point Bill-Iwrote my states office 4 months ago for hull # or app for.No answer yet -probably went in circular file bucket near desk.
Working on regular-sized Bo-Jest


"If it's not crooked,It's not mine

Ozzieboat
Posts: 270
Joined: Sun Jun 07, 2009 4:40 am
Location: Logan, Queensland, Australia

Re: Regulations

Post by Ozzieboat »

Donald
Most of your USCG regulations have been mirrored down under either as law or as a non-mandatory standard. The only regulations we have to comply with (for all recreational boats not just amateur built ones) are those required to be detailed on the Builders Plate. These relate to number of occupants, outboard size and flotation etc. However just like aviation there are enough things in boating that one is not aware of that can ruin your whole day, so why ignore the things of common knowledge that you can do something about. All of these regulations were founded on death or injury. Go that little bit further. I found it was not too much of a problem to comply with most requirements for recreational boats. For example, both the USCG requirements for backyard builders as well as those for professional builders. You then have a safe boat in which you have trust. The ABYC produce material on how to comply with the USCG regulations.
ozzieboat

User avatar
hzchevy
Posts: 78
Joined: Sat Sep 25, 2010 2:24 pm
Location: Melbourne, Australia.

Re: Regulations

Post by hzchevy »

I was also stressing when I started to read all the regulations but here in Victoria, Australia I found a small loop hole. That being, if I was the owner/builder I didn't need to get a builders plate. I only require the plate if I were to try and sell it.
I went to VicRoads ( who handle boat registration ) with all receipts, paper and nervous as hell of being rejected and got complied in less than 5 minutes. ( Winner :D ).
Not sure of the laws in the states but surely it's not that hard. Good luck.

Post Reply

Return to “Power Boats”