The Fletchers Malahini

Designs for inboard or outboard power

Moderator: BruceDow

PeterG
Posts: 702
Joined: Mon Dec 03, 2007 7:08 am
Location: Connecticut

Re: The Fletchers Malahini

Post by PeterG » Sat May 11, 2019 5:56 am

Wow, that came out great!
Murphy's Law: Anything that can go wrong, will go wrong.
Griffin's Law: Murphy was an optimist.

User avatar
mrintense
Posts: 3396
Joined: Thu Jun 10, 2010 11:22 am
Location: Austin, Texas
Contact:

Re: The Fletchers Malahini

Post by mrintense » Sat May 11, 2019 7:53 am

Oh yeah, that ribboning effect looks really fine! Love it. :D :D
Carl
a.k.a. Clipper

Crafting a classically styled Vera Cruise

Clipper's Vera Cruise Build

Biss
Posts: 216
Joined: Fri Apr 27, 2018 1:11 pm
Location: Camden, AR

Re: The Fletchers Malahini

Post by Biss » Mon May 20, 2019 5:02 pm

The planking looks super nice. Going to really stand out when complete.

bstrong
Posts: 75
Joined: Fri Sep 14, 2018 9:44 am

Re: The Fletchers Malahini

Post by bstrong » Tue May 21, 2019 3:32 pm

boat.jpg
boat2.jpg
Attaching the spray rails and skeg. Getting closer to the flip!
Thanks to everyone for your feedback :D

denbrlr
Posts: 406
Joined: Sat Sep 18, 2010 10:06 am
Location: Peoria, IL

Re: The Fletchers Malahini

Post by denbrlr » Tue May 21, 2019 7:01 pm

That looks really nice. Any problems with the 4oz weave showing through on the sides?

Lee

bstrong
Posts: 75
Joined: Fri Sep 14, 2018 9:44 am

Re: The Fletchers Malahini

Post by bstrong » Tue May 21, 2019 7:53 pm

4oz cloth vanished when wetted out with west 207, I wasn't confident enough to use anything heavier.

bstrong
Posts: 75
Joined: Fri Sep 14, 2018 9:44 am

Re: The Fletchers Malahini

Post by bstrong » Tue May 28, 2019 5:13 pm

boat 6.jpg
Sanded and painted the bottom with graphite, I didn't bring it all the way up to where the line will be. I will finish that after the flip.

bstrong
Posts: 75
Joined: Fri Sep 14, 2018 9:44 am

Re: The Fletchers Malahini

Post by bstrong » Wed Jun 12, 2019 5:58 pm

Got the boat flipped, bumper rails are on. I am thinking of moving deck frame #4 back about 7" to give more room, is this a bad idea? Now have to start encapsulating. Also is the decking supposed to overlap the sides or just meet it, or is it up to the builder? I am trying to figure out how the rub rail will go on and look. Thanks to everyone here, I have been following everybody. :D
Attachments
IMG_20190611_173813431.jpg
IMG_20190605_162345882_HDR.jpg
IMG_20190605_152539873_HDR.jpg

Hercdrvr
Posts: 998
Joined: Mon May 11, 2015 12:52 pm
Location: McKinney TX

Re: The Fletchers Malahini

Post by Hercdrvr » Wed Jun 12, 2019 7:50 pm

I’m not following what you mean by moving the deck beam at frame #4 back 7 inches. Seven inches aft of frame #4 is about where the dash is.
Maybe your counting frames from the bow aft and really talking about frame #1. In that case, you could move the deck beam and back seat aft 7” for more room. Do you plan on having a hatch in front of the motorwell? Hatch space will be tight if you take 7”. Sorry if I’m the one all twisted backwards.
Matt B

footer
Posts: 296
Joined: Wed Jan 24, 2018 6:28 am
Location: Plainwell MI

Re: The Fletchers Malahini

Post by footer » Thu Jun 13, 2019 3:14 am

For me, I'm installing bucket seats in the front and it gave me more than plenty of room for the people in the back.
I ran my top deck boards to the edge, sanded them flat with the top ply and added a 1"x1/4" trim around the edge to cover the edges of both.
It's looking good. I'd like to see a side shot of your spray rails.

bstrong
Posts: 75
Joined: Fri Sep 14, 2018 9:44 am

Re: The Fletchers Malahini

Post by bstrong » Thu Jun 13, 2019 6:49 am

Yes sorry I meant frame #1, I am not sure about it because of the loss of possible storage. I was planning on putting my stern light centered behind the rear seat and figured that would end the possibility of having a hatch in the center. I could still do the hatches on each side but they would be smaller.
I was going to build the front seats from the plans to have storage behind them, decisions, decisions. I also have 2 fuel tanks in mind one 12 gal and a 19 gal. I am waiting to see how Biss makes out with his 19 gal. and his hatches. Here is a photo of the bumper rails from the side. Sorry but not sure why the photos turned sideways.
Attachments
bumper rails.jpg

footer
Posts: 296
Joined: Wed Jan 24, 2018 6:28 am
Location: Plainwell MI

Re: The Fletchers Malahini

Post by footer » Thu Jun 13, 2019 7:12 am

Thanks for the pic. Not sure either why they turn sideways, mine do too sometimes, but they usually flip right when you click on them.

User avatar
DrBryanJ
Posts: 1020
Joined: Fri Jul 22, 2011 6:05 am
Location: Pompton Plains, NJ

Re: The Fletchers Malahini

Post by DrBryanJ » Thu Jun 13, 2019 7:16 am

I like the bumper rails. By the way, the pictures turn upside down or sideways depending how you hold your phone while taking them.

I also am considering pushing the cross rail at frame one more aft and have two smaller storage areas on either side of the motor well. If fact, I'm trying to figure a way to make one of them a cooler. I don't plan on having storage behind the front seats, so I might not need to. I still like the cooler idea though.
Bryan

Building a malahini "Mona Lisa"

My wife said "If I build a boat, she's getting a divorce."

Sarnian
Posts: 144
Joined: Fri Jul 27, 2018 10:58 am
Location: Montgomery County, Maryland

Re: The Fletchers Malahini

Post by Sarnian » Thu Jun 13, 2019 10:14 am

Congratulations on the flip!

My plan is a rub rail to hide the ply sub-deck - having just priced SS rub rail I may reconsider.... :o

User avatar
Bill Edmundson
Posts: 11671
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:

Re: The Fletchers Malahini

Post by Bill Edmundson » Thu Jun 13, 2019 10:36 am

Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build

Post Reply

Return to “Power Boats”