Kayak-Canoe hull contour jig
- steve crawford
- Posts: 391
- Joined: Thu Aug 24, 2006 6:55 pm
- Location: K.C. MO.
Kayak-Canoe hull contour jig
I saw this somewhere and saved the pic. It is made from left over cedar strips that have been bead and cove edges. The pic on the left shows a black foam strip on the face of a plywood strip. Just flip this board up and clamp it and the cedar strips are held in-place to be able to transfer the pattern to paper or form material. Come in handy to turn you're favorite plastic canoe into a striper.
THE FRAUD WILL NOT GO AWAY..9-11 WAS AN INSIDE JOB...
http://www.drjudywood.com/
http://s147.photobucket.com/albums/r302 ... rd_photos/
https://www.flickr.com/photos/mo_kayaks/sets/
http://www.drjudywood.com/
http://s147.photobucket.com/albums/r302 ... rd_photos/
https://www.flickr.com/photos/mo_kayaks/sets/
Re: Kayak-Canoe hull contour jig
Great Idea....I have one of the small metal ones that I've used for transferring molding lines etc for tile,other molding etc.