a 24' inboard deep vee runabout Build in PLYWOOD

Length overall 24'-5"
Beam 7'-11"
Hull draft 14"
Displacement 3989 lbs.
Hull weight (approx.) 1500 lbs.
Hull depth 4'-2"
Freeboard forward 2'-2"
Freeboard aft 2'-0"
Cockpit size 6'-3" x 6'-6"
Fuel capacity 90 gals. standard, 120 gals. optional
Average passengers 4
Sleeping accommodations 2
  • Hull type: Full length deep vee with lift strakes and 20 degree deadrise bottom. Developed for sheet plywood planking on the sides and double plywood planking on the bottom.
  • Power: Inboard, stern mounted engine driving through a vee drive or outdrive unit. While most engines will drive direct, reduction gears may be required on some. Combined weight of engine and transmission equipment should be as follows: I/O units should be at least 600 lbs., but not more than 1200 lbs. V-drive units should be at least 800 lbs., but not more than 1600 lbs. Jet drives may be used with minor modifications.
  • Can the hull be extended or shortened? Yes. Up to 10% by re-spacing the frames from the aft end of the stem to the transom a proportional amount. We do not recommend increasing the beam.
  • Trailer: Designed for use with Glen-L Series 3800 boat trailer plans.

Photographs Bill of Materials Notes Return

Glen-L marine designs / / Boat plans for the home builder