#653 a 21' deep vee ski boat Build in PLYWOOD

Length overall 20'-8"
Beam 7'-11"
Hull depth 31"
Height overall 3'-4"
Average passengers 1-4
Cockpit size 9'-4" x 6'-6"
Hull weight (approx.) 1000 lbs.
  • Hull type: Full length deep vee bottom with 12o deadrise and flaring sides. Developed for sheet plywood planking.
  • Power: Outboard power: Single 20" or 25" long shaft motor to 220 hp. Twins may be used as long as the total weight does not exceed 500 lbs. Inboard power: Single stern mounted engine driving through a vee drive, jet pump, or outdrive, 1000 lbs. maximum combined weight.
  • Can the hull be extended or shortened? Yes. Up to 10% by re-spacing the frames from the aft end of the stem to the transom a proportional amount. We do not recommend increasing the beam.
  • Trailer: Designed for use with Glen-L Series 2100 boat trailer plans.

Photographs Bill of Materials Notes Return

Glen-L marine designs / / Boat plans for the home builder