#784 an 18' pocket cruiser Build in PLYWOOD

Mini tug cruiser

Length overall 17'-10"
Length waterline 17'-0"
Beam 7'-11"
Draft (inboard version) 21"
Draft (outboard version) 14"
Displacement 2660
Hull weight (approx.) 800 lbs.
Freeboard forward 3'-7"
Freeboard aft 2'-1"
Hull depth 4'-10"
Height overall (inboard version) 8'-4"
Height overall (outboard version) 7'-8"
Headroom (pilothouse) 6'-1" to 6'-4"
Headroom (trunk cabin) 4'-1" to 4'-4"
Cockpit size 4'-6" x 6'-0"
Fuel capacity 26 gals.
Fresh water capacity 20 gals.
Sleeping accommodations 2
Hull type: Hard chine semi-displacement vee-bottom with skeg, developed for sheet plywood planking.
Power: Single inboard (gasoline or diesel), or long or short shaft outboard, 5 to 10 shaft hp for speeds of 5 to 8 knots.
Can the hull be extended or shortened? Yes. Up to 10% by re-spacing the frames from the aft end of the stem to the transom a proportional amount. We do not recommend increasing the beam.
Trailer: Designed for use with Glen-L Series 2100 boat trailer plans.

Photographs Bill of Materials Notes Return

Glen-L marine designs / / Boat plans for the home builder