Union Jack |
||
|---|---|---|
| #931 | a 31' semi-displacement trawler yacht | Build in STEEL |
| Characteristics | |
|---|---|
| Length overall | 30'-11" |
| Length waterline | 28'-0" |
| Beam | 11'-6" |
| Hull draft | 3'-4 1/2" |
| Displacement | 17,100 lbs. |
| Weight of steel hull components | 7000 lbs. |
| Hull depth | 8'-3" |
| Freeboard forward | 5'-6" |
| Freeboard aft | 3'-0" |
| Height (with stack) | 12'-7 1/2" |
| Headroom | 6'-2" to 6'-8" |
| Cockpit size | 3'-3" x 8'-5" |
| Fuel capacity | 350 gals. |
| Fresh water capacity | 250 gals. |
| Cruising range (at 7 knots) | 1000+ miles |
| Sleeping accommodations | 5 |
| Hull type: Semi-displacement hard chine hull developed for
sheet steel (10 ga.) construction with practical speeds to 8 1/2 knots. Power: Single diesel engine of 40 to 70 continuous shaft horsepower for 7 to 8 1/2 knot speed using appropriate reduction gear and propeller. Can the hull be extended or shortened? Yes. Up to 10% by re-spacing the frames from the aft end of the stem to the transom a proportional amount. We do not recommend increasing the beam. |
|
| Photographs | Bill of Materials | Notes | Return |
|---|
Glen-L marine designs / www.glen-l.com / Boat plans for the home builder