Here's the answer to the dinghy storage and portage problem - the CENTERFOLD! She folds or hinges right across the middle, or can be made to take apart. The two separate parts are lighter and easier to carry than a conventional dinghy. Even the mast on the sailing version can be made in two parts for easy carrying and storage. The CENTERFOLD is thus the perfect ship-to-shore dinghy for the smaller cruisers where space is at a premium. Best of all, this boat is simple, easy and inexpensive to build. No lofting, no building forms, and no frames are required.
For added convenience, we have a series of kits, including fiberglass covering kits to reduce hull maintenance, and a fastening kit so you don't have to shop around for those hard-to-find screws and boat nails. If you wish to use the CENTERFOLD as a sailing dinghy, we have hardware/rigging kits plus sails ready for use.
COMPLETE PLANS include FULL SIZE PATTERNS for the sheer harpin, bow member, center frames and seat, aft and bow seats, transom and bow knees, trunk brace, rudder, tiller, and half section pattern for the mast brace. Includes instructions, Bill of Materials, and Fastening Schedule.
- Length overall:
- 7'-10"
- Beam:
- 4'-0"
- Depth amidships:
- 18"
- Average passengers:
- 1-2
- Weight (approx.):
- 70 lbs.
- Sail area:
- 39 sq. ft.
- Hull type:
- Arc bottom pram, hard chine hull developed for sheet plywood planking. May be taken apart or folded across the middle for storage or portage. The pieces are non-nesting.
- Power:
- Intended for rowing, sailing, or 3 hp max. short-shaft outboard motor.