Islander |
||
|---|---|---|
| #799 | a 25' classicly styled cabin cruiser | Build in PLYWOOD |
| Characteristics | |
|---|---|
| Length overall | 24'-11" |
| Length waterline | 21'-7" |
| Beam | 9'-8" |
| Hull draft | 17" |
| Displacement | 5355 lbs. |
| Hull weight (approx.) | 1500 lbs. |
| Hull depth | 4'-11" |
| Freeboard forward | 3'-7" |
| Freeboard aft | 2'-8" |
| Headroom | 6'-1/2" |
| Cockpit size | 10' x 7' |
| Fuel capacity | 56 gals. |
| Fresh water capacity | 25 gals. |
| Sleeping accommodations | 4 |
| Hull type: Vee bottom, hard chine hull with bulbous keel and
reverse curve at the chine. Bottom designed for double diagonal plywood
planking, sides developed for sheet plywood. Power: Single centrally located inboard motor. Reduction gearing may be required depending on the motor. Can the hull be extended or shortened? Yes. Up to 10% by re-spacing the frames from the aft end of the stem to the transom a proportional amount. We do not recommend increasing the beam. |
|
| Photographs | Bill of Materials | Notes | Return |
|---|
Glen-L marine designs / www.glen-l.com / Boat plans for the home builder