Sea Angler-FG Bill of Materials

The following listing is an estimate of the fiberglass materials required to build the basic hull only. The material listing is intended to serve as a general guide only and should not be used to purchase materials until the various options and alternatives have been checked to the plans, to the work, and to the materials which may be available in the area in which the hull will be built. The listing is ony an estimate and may vary with the amount of waste encountered in the work, the sizes and types of material available, and other variables that cannot be controlled. Figures for materials listed include an overage factor or allow for fitting and trimming to size, but it is probable that additional materials may be required due to waster, defects, how the materials are utilized, etc. In all cases, check the plans and instructions for options.

HULL LAMINATE MATERIAL- FIBERGLASS PLANKING METHOD

• Fiberglass planking "CF-65" or comparable weight: 800 sq. ft. (*)
• Fiberglass mat 1 oz per square foot: 5904 square feet or 369 lbs.
• Fiberglass woven roving 18 oz per square yard: 500 square yard or 563 lbs.
• Polyester non-thixotropic laminating resin with catalyst for fiberglass planking: 300 lbs. or approximately 33 gallons
• Polyester laminating resin with catalyst: 1700 lbs. or approximately 189 gallons
• Foam for formers, 1" thick PVC or comparable: 400 sq. ft.
  (*) Includes material for making top hat stiffeners using fiberglass planking.

HULL LAMINATE MATERIAL ESTIMATE - FOAM SANDWICH METHOD

• Foam material (PVC) 5/8" thick or comparable: 345 sq. ft.
• Foam material (PVC) 3/4" thick or comparable: 335 sq. ft.
• Foam for formers, 1" thick PVC or comparable: 400 sq. ft.
• Fiberglass mat 1 oz per square foot: 4800 sq. ft. or 300 lbs.
• Fiberglass woven roving 18 oz per square yard: 510 lbs. or 440 sq. yds.
• Polyester resin with catalyst: 1400 pounds or approx. 156 gallons

Return