Looking for information on a specific boat design or topic?
Click on the search magnifying glass icon at the top left of this page and enter your search text
In this stage of building the Glen-L Malahini, I focused on the hardware, trailer set up, sign writing and registration for the boat. I also decided to add carpet to the floor. … read more
Building the Riviera was a very long journey. You will find pictures in my Gallery that show it starting a long while back. It took two phases. Phase one, in the first home and shop took me to the co … read more
During this stage of building the Glen-L Malahini, I sanded the timber back, applied 4 coats of epoxy and then applied paint and clear finish. I decided to go for a blue stripe in the middle of the bo … read more
In the third stage of the Glen-L Malahini build, I added fibre glass cloth to the base of the boat and also to the sides where the joints were. I then moved on to paint the bottom of the boat and want … read more
For the second stage of the Glen-L Malahini build, I chose to use a Sapelli Mahogany marine ply veneer. As the sheets weren't long enough, I had to put two joins in the boat, as seen in the images. … read more
I am Elio Ascenzo from Melbourne, Australia and when I decided to build the Glen-L Malahini, it was a bit more difficult starting off here in Melbourne as I didn't have the same timber choices as the … read more