Looking for information on a specific boat design or topic?
Click on the search magnifying glass icon at the top left of this page and enter your search text
In this stage of building the Glen-L Malahini, I focused on the hardware, trailer set up, sign writing and registration for the boat. I also decided to add carpet to the floor. … read more
During this stage of building the Glen-L Malahini, I sanded the timber back, applied 4 coats of epoxy and then applied paint and clear finish. I decided to go for a blue stripe in the middle of the bo … read more
In the fourth stage of building the Glen-L Malahini, the boat was flipped and all the framework for the internal parts of the boat were made. The seats were made out of Kauri and Mahogany veneer. I ma … read more
I am Elio Ascenzo from Melbourne, Australia and when I decided to build the Glen-L Malahini, it was a bit more difficult starting off here in Melbourne as I didn't have the same timber choices as the … read more
Refinishing deck I finished building my Malahini nearly 3 years ago. I finished the top surface deck with at least four coats of Silver Tip Epoxy followed by at least four coats of System … read more
Frames I spent the month of July making the frames for my Malahini and took August off. September is off to a good start with building the form and hanging the frames. I raised the height of … read more