Little Hunk
|
| #560 |
an 18' power fishing
dory |
Build in PLYWOOD |
| Characteristics |
| Length overall (standard) |
18'-3" |
| Length overall (inboard) |
17'-6" |
| Beam |
7'-6" |
| Hull weight (approx.) |
700 lbs. |
| Hull depth forward |
3'-11" |
| Hull depth aft |
2'-6" |
| Bottom width |
4'-6" |
| Minimum recommended power |
25 hp |
| Maximum engine/drive weight |
500 lbs. |
- Power: Single well-mounted or transom mounted outboard standard. Short
shaft motors not recommended. Inboard driving through outdrive or jet pump
optional.
- Hull type: Flat bottom dory-type hull aft. Developed for sheet plywood
planking with outer rub strakes.
- Can the hull be extended or shortened? Yes. Up to 3' by re-spacing the
frames from the aft end of the stem to the transom a proportional amount, or by
adding an additional frame. We do not recommend increasing the beam.
- Trailer: Designed for use with Glen-L Series 1700 boat trailer plans.
|
Glen-L marine designs / www.glen-l.com / Boat
plans for the home builder
|