Noyo Trawler

#806 a 24' trailerable commercial fishing or cargo boat Build in PLYWOOD


Noyo trawler



Characteristics
Length overall 24'-1"
Length waterline 22'-0"
Beam 8'-0"
Hull draft 27"
Displacement 5532 lbs.
Hull weight (approx.) 1600 lbs.
Hull depth 6'-9"
Freeboard forward 5'-0"
Freeboard aft 3'-2"
Height overall (without mast) 9'-9"
Headroom 6'-1"
Fuel capacity 80 gals.
Hold volume (approx.) 140 cu. ft.
Sail area 24 sq. ft.
Sleeping accommodations 2
  • Hull type: Semi-displacement, hard chine hull with practical cruising speed of 7 to 8 knots, and a maximum hull speed of approx. 9 knots. Bottom design features bulbous forefoot with a reverse curve at the chine. Double diagonally planked to total thickness of 1/2" (3/4" optional). Topsides planked with sheet plywood to a total thickness of 3/8" (1/2" optional). Carvel planking or other conventional types are optional but not detailed in the plans.
  • Power: Single centrally mounted diesel or gasoline inboard; 10 shp for 7 knot cruising speed, however, 20 -25 shp advised where wind and sea conditions are against the vessel. Engines rated over 35 shp not recommended. Total engine and gear should be 600 lbs. plus or minus 10%.
  • Can the hull be extended or shortened? It cannot be extended, but can be shortened up to 10% by re-spacing the frames from the aft end of the stem to the transom a proportional amount. We do not recommend increasing the beam.
  • Trailer: Designed for use with Glen-L Series 6000 boat trailer plans.

Photographs Bill of Materials Notes Return


Glen-L marine designs / www.glen-l.com / Boat plans for the home builder