#250 a 35' ketch or cutter rigged sailboat Build in STEEL

Aquarian steel sailboat plans

Length overall (on deck) 35'-0"
Length overall (with bowsprit) 38'-3"
Length waterline 28'-4"
Beam 12'-0"
Draft 5'-0"
Freeboard forward 4'-11"
Freeboard aft 3'-8"
Displacement (at D.W.L.) 20,200 lbs.
Ballast weight 7,000 lbs.
Weight of steel components (estimated) 8,000 lbs.
Cabin headroom 6'-2" to 6'-4"
Fuel capacity 70 gals.
Water capacity 160 gals.
Sleeping accommodations 5
Sail area - Cutter Main - 333 sq. ft.
Foretriangle - 414 sq. ft.
Total - 747 sq. ft.
Sail area - Ketch Main - 294 sq. ft.
Foretriangle - 360 sq. ft.
Mizzen - 79 sq. ft.
Total - 733 sq. ft.
Hull type: Multi-chine sheet steel hull with full length internal ballast keel.
Ballast: Concrete and scrap steel.
Sail type: Masthead cutter or ketch rig with bowsprit and club-footed jib.
Power: Single inboard diesel engine of 30-35 shp with reduction gear to suit.
Construction: Welded steel hull, keel, deck and cockpit with concrete and scrap steel ballast. Cabin superstructure, cockpit, and interior of lumber and plywood with exterior surfaces sheathed in fiberglass or equivalent.

Photographs Bill of Materials Return

Glen-L marine designs / / Boat plans for the home builder